THESE SPACERS WILL SLIP OVER THE HUB ON THE FOLLOWING VEHICLES (WILL REQUIRE LONGER STUDS FOR OPTIMAL PERFORMANCE)

1997-1999 Acura CL
1986-1990 Acura Legend
1996-1998 ACura TL
1992-1994 Acura Vigor

1990-2002 Honda Accord
1992-1996 Honda Prelude

1995-1998 Hyundai Accent
1992-2006 Hyundai Elantra
1993-2002 Hyundai Sonata
1997-2001 Hyundai Tiburon

2001-2005 Kia Optima
2005-2009 Kia Spectra 5

1993-1998 Mitsubishi Galant
2002-2006 Mitsubishi Lancer (OZ Rally Sedan 4 Door Only)

ADDITIONAL INFORMATION

• Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
• Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
• Installation needs to be performed by a trained professional

It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:

Your lugs studs will need to be shortened by grinding them down

You can replace your studs will shorter studs

if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)

ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS

• Vehicle Bolt Pattern: 4x100
• Hub Bore: 54.1mm
• Thickness: Each Spacer Measure 3mm Thick
• May NOT WORK with stock length studs. Extended Wheel Studs are recommended for proper installation
• Hubcentric Wheel Spacers. This means it will fit perfectly over your hub - eliminating possibility of vibrations. Perfect for fixing clearance issues if your wheel(s) is hitting your shocks or brake calipers

Vehicle Bolt Pattern: 4x100Titan Wheel Accessories