THESE SPACERS WILL SLIP OVER THE HUB ON THE FOLLOWING VEHICLES (WILL REQUIRE LONGER STUDS FOR OPTIMAL PERFORMANCE)

1996-2003 BMW 525i
1996-2003 BMW 528i
1996-2003 BMW 530i
1997-2003 BMW 540i
1999-2003 BMW M5
2007-2016 BMW X5
2008-2013 BMW X6 (REAR HUBS ONLY)

ADDITIONAL INFORMATION

• Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
• Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
• Installation needs to be performed by a trained professional

It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:

Your lugs studs will need to be shortened by grinding them down

You can replace your studs will shorter studs

if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)

ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS

• Vehicle Bolt Pattern: 5x120
• Hub Bore: 74.1mm
• Thickness: Each Spacer Measure 1" Thick
• Will NOT WORK with stock length studs. Extended Wheel Studs are ABSOLUTELY NEEDED for proper installation
• Hubcentric Wheel Spacers with Wheel-Centric Lip. This means it will fit perfectly over your hub - eliminating possibility of vibrations. Perfect for fixing clearance issues if your wheel(s) is hitting your shocks or brake calipers

Vehicle Bolt Pattern: 5x120Titan Wheel Accessories