Color classification : DC 12V DC 24V other, please remark and consultation with the owner
Note: the module is the output voltage, that is, the input 12V output is also 12V, the input 24V output is 24V, pay attention to the matching voltage. If you need a dry contact (i.e., the contact is not charged) version please contact the owner or directly click on the link.https://item.taobao.com/item.htmid=36941731377.
The module is on the basis of the JK12 will be charged to the output of the output, so JK13 and JK12 selection table to adapt to this module, also has a positive and negative display of different versions, and 9.9 seconds, AR ADM AM and so on. Please refer to JK12 and JK13 in the introduction. If no notes, this link directly to the following specifications for the delivery of parameters.
Function: trigger switch and countdown, and then trigger off. Or the end of the countdown also disconnected.
Model: JK12C
Voltage: DC 12V (adaptive range 10V-16V). 24V version range is 18V-27V.
Standby current: 4.5mA
Pull current: 40mA (no load)
Delay accuracy: 1 (unit for minutes or seconds)
Time: the jumper can be set to minutes or seconds
Time range: 1-99
Timing error: plus or minus 2%
Module size: 66mm * 32mm (height Selection reference:
Please note type. Default shipping model:JK12C-A-12V.
Voltage: where 12V is 12V, if you need 24V version, please change 24V to 12V.
time: the default time range is 1-99 seconds / minutes, seconds and the user can change the jumper cap to set.If you need 0.1 seconds -9.9 seconds range version, please add the word "-9.9S" in the back of the model.
display: the model of the A digital tube in the part of the side, such as the digital tube in the welding side of the "A" to "B"".
If not please contact customer, this module for the original design of the studio, in addition to the following models can be customi

• Trigger delay relay module
• Delay relay module with display
• Direct output
• With display.
• 3C digital accessories