SDI switcher is a 2 input, 1 output switcher designed to switch two SDI sources to one SDI monitor or display. For optimum performance the SDI switcher is loaded with re-clocking technology to drive the signal at longer distances and supports SDI, HD-SDI and 3G-SDI signals. Ideally used with SDI based HDCCTV surveillance systems, rental & staging facilities, post-production, TV studio, digital cinema, or other A/V applications where you need to switch and split from an SDI camera or other device equipped with 3G/HD/SD-SDI outputs to one SDI-compliant display or video processor.

Features:

Features equalizer circuit on the input and outputs, allowing it to support long cable runs

Support multiple video resolution:

SD 525i and 625i
HD 720p at 24, 25, 30, 50 and 60 Hz
HD 1080i at 50, 60 Hz
HD 1080p at 24, 25, 30, 50 and 60 Hz

Support multiple color space:

RGB or YCbCr 4:4:4 sampled
YCbCr 4:2:2 or 4:2:0 sampled
Support wide range of data rates: 270Mbps ~ 2.97Gbps
Support multiple deep color: 8bit, 10bit, 12bit

Specification:

Input connector: 2 x SDI BNC Male
Output connector: 1 x SDI BNC Male
Supported cable length(BELDEN 1694A)
3G mode: up to 330 ft.
HD mode: up to 660 ft.
SD mode: up to 1320ft.

• Supports multiple video resolutions
• Data rates up to 2.97 Gbps
• Automatically switches between SD, HD and 3 Gb/s SDI standards
• HD mode length up to: 130m
• Supports 8 bit, 10 bit & 12 bit color depth

Supports multiple video resolutionsbuytosave