Description:

Brass sheet is mainly used for riveting,cutting tools and all kinds of precision parts.

Having good mechanical properties and hot plasticity as well as good machinability, the sheets are easy to weld, and it has corrosion resistant, but easy to produce corrosion cracking. 

It is one of the widely used ordinary brass varieties. Used for the loaded parts made of a variety of deep stretching and bending stress such as pin, rivets, washers, nuts, conduit, barometer spring, screen mesh, radiator parts,etc.

Specifications:

Material: H62 brass

Dimension: 300mm x 100mm

Thickness: 0.5mm

Features:

Heat treatment

Hot working temperature: 650 ~ 850 ℃

Annealing temperature: 600 ~ 700 ℃

Eliminate the internal stress of low annealing temperature: 270 ~ 300 ℃

Chemical composition of H62

Cu (%): 60.5-63.5

Fe(%): 0.15

Pb(%): 0.08

Ni(%): 0.5

Zn(%):35.27-38.27

Impurities(%): 0.5

Hardness: Y2

Tensile strength σb.N/mm2: 343-460

Elongation δ(%): ≥20

Electrical conductivity IACS(%): --

Reduction of area ψ(%): ≥18

Package included:

1 x Brass Sheet

• Heat treatment.
• Chemical composition of H62.
• Brass sheet is mainly used for riveting, cutting tools and all kinds of precision parts.
• It is one of the widely used ordinary brass varieties.
• Used for the loaded parts made of a variety of deep stretching and bending stress such as pin, rivets, washers, nuts, conduit, barometer spring, screen mesh, radiator parts,etc.