30 Days Lowest Price Guarantee
Aneagle® SP Racing F3 Flight Controller Board ACRO for Mini FPV Racing Quadcopter
$ 29.99
DESCRIPTION
Description:
Item Name: Racing F3 Flight Control NAZE32 Upgrade Version for
Milticopter Acro Version
Version: Acro 6DOF
*36x36mm board, 30.5 mm mounting holes.
STM32F3 CPU.
High-capacity Flash (Acro 6DOF)
MPU6050 Accelerometers and Gyroscopes
MicroUSB socket.
4 x 4 pin JST-SH Socket (I2C, SWD, 2xuart)
2 x 8 pin JST-SH Socket (PPM, PWM, SERIAL RX, GPIO, ADC, 3V, 5V, GND)
8 x 3 pin though-holes for pin headers for ESC / Servo connections.
2 x 4 pin though-holes for the 2x serial ports .
2 x 2 pin though-holes for battery voltage and buzzer.
Flight Performance:
The SPR F3 builds on tried and tested software, processor and sensor technology to make your aircraft fly like it's on rails.
No-Compromise I/O:
Use all the features all the time; e.g. Connect your OSD + SmartPort + SBus + GPS + LED Strip + Battery Monitoring + Sonar + 8 motors - all at the same time!
Configurable:
The F3 runs Cleanflight which can be configured to suit your needs using a cross-platform GUI (Windows/OSX/Linux).
Tiny and lightweight:
The RacingF3 has a standard 36x36mm form-factor with 30.5mm mounting holes and weighs just 6 grams.
OneShot ESC:
Full support for OneShot ESCs for easy PID tuning and a sharper response.
Broad RC receiver Support:
Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers. No external inverters required (built-in).
Programmable LED:
Dedicated output for programmable LEDs - great for orientation, racing and night flying.
Packaged Included:
1 x Upgrade NAZE32 Racing F3 Flight Control for Multicopter
2 x 8p Wire Rod
2 x 4p Extension Path
5 x Pins set
Item Name: Racing F3 Flight Control NAZE32 Upgrade Version for
Milticopter Acro Version
Version: Acro 6DOF
*36x36mm board, 30.5 mm mounting holes.
STM32F3 CPU.
High-capacity Flash (Acro 6DOF)
MPU6050 Accelerometers and Gyroscopes
MicroUSB socket.
4 x 4 pin JST-SH Socket (I2C, SWD, 2xuart)
2 x 8 pin JST-SH Socket (PPM, PWM, SERIAL RX, GPIO, ADC, 3V, 5V, GND)
8 x 3 pin though-holes for pin headers for ESC / Servo connections.
2 x 4 pin though-holes for the 2x serial ports .
2 x 2 pin though-holes for battery voltage and buzzer.
Flight Performance:
The SPR F3 builds on tried and tested software, processor and sensor technology to make your aircraft fly like it's on rails.
No-Compromise I/O:
Use all the features all the time; e.g. Connect your OSD + SmartPort + SBus + GPS + LED Strip + Battery Monitoring + Sonar + 8 motors - all at the same time!
Configurable:
The F3 runs Cleanflight which can be configured to suit your needs using a cross-platform GUI (Windows/OSX/Linux).
Tiny and lightweight:
The RacingF3 has a standard 36x36mm form-factor with 30.5mm mounting holes and weighs just 6 grams.
OneShot ESC:
Full support for OneShot ESCs for easy PID tuning and a sharper response.
Broad RC receiver Support:
Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers. No external inverters required (built-in).
Programmable LED:
Dedicated output for programmable LEDs - great for orientation, racing and night flying.
Packaged Included:
1 x Upgrade NAZE32 Racing F3 Flight Control for Multicopter
2 x 8p Wire Rod
2 x 4p Extension Path
5 x Pins set
- Supports OneShot ESC and more than 8 RC channels.Supports more flight controllers, including CC3D, CJMCU and Sparky.
- Additional PID controllers that uses floating point arithmetic operations. (now has 3 built-in PID Controllers)
- Main board STM32F303, the processing speed of 128MHz, supports efficient flight attitude of floating-point operations
- Many more features such as RGB LED strip support, Autotune, In-flight PID tuning with your radio, blackbox flight data logging etc.
- Better coding practices and introducing tests, easier to maintain and for future development. (Dominic has software development background)
