Specificaton:
Material: PVC
Product Size: 3.9*5.8 (in) / 9.8*14.8cm
Product Weight：0.9lb / 415g
Laser Classification: Class Ⅱ
Maximum Laser power: Power Input: AC adapter, Input: 110v/50hz, Output: DC 12V, 0.5A
Laser wavelength: 532nm (green); 660nm (red)
Operating Temperature : -40℃ to 80℃(-40℉ to 176℉)
Projection Coverage: 50-200㎡
Dimensions: ¢ 98 * 315mm


Package list:
1 x Laser Light with Power Cable
1 x Screw
1 x Spike
1 x Bracket
1 x Power Adapter
1 x User Manual
1 x IR Remote Controller (with battery)

• RC MATCH: The RC need to match the light before use. Steps: 1. After plugged in power, press the power buttom of the RC to power off in 5 seconds. Please notice must be in 5 seconds. 2. And then, press the power buttom of the RC to power on (please notice no need to pull the plug out). 3. If you can change the light pattern, it means the RC match successfully. If not, you could please try again or e-mail us again your problem. 4. PS: There is no obstacles between the RC and the light.
• NO HARM TO EYES: Class Ⅱ outdoor laser protection (1WM) will not harmful to eyes. But we advise consumers don't stare at the laser light for long time.
• APPLICATIONS: Projection Coverage: 60-240sq.yd (50-200㎡), can be used in discos, bars, KTV rooms, Landscape, lounge, DISCO, clubs, for Halloween, Christmas, holiday, wedding, performing arts, birthday party, family Party and garden decoration.
• PATTERN: Adjustable model: Red, Green, Red and Green, Flashing or Fixed. Universal remote control with the direction of rotation, speed rotation, strobe effect, color control fuction.
• NOTICE AND WARRANTY: 1. Strict accordance with the instructions to operate, do not disassemble the host and accessories. 2. This product is suitable for indoor/outdoor use. 3. Avoid using the telescope to observe the laser light source device, which may increase the danger. Warnings: The product of the power requirements 110V/50HZ, if outside this range, use the regulator device, otherwise it will affect the service life. Warranty for 90 days from the date of purchase.

RC MATCH: The RC need to match the light before use. Steps: 1. After plugged in power, press the power buttom of the RC to power off in 5 seconds. Please notice must be in 5 seconds. 2. And then, press the power buttom of the RC to power on (please notice no need to pull the plug out). 3. If you can change the light pattern, it means the RC match successfully. If not, you could please try again or e-mail us again your problem. 4. PS: There is no obstacles between the RC and the light.ARINO