Features:
This 2.4 inch TFT LCD screen baby monitor is an amazing product for all parents or nannies to monitor their babies
Addition can be used for a baby monitor, baby monitors applicable to the care of the elderly and the supermarket, office, security companies, schools, families, hospitals and small places
2.4GHz wireless digital technology, no interference, no privacy leak
Built-in night light
Built-in lullabies, make baby more fast & soft to fall asleep
Built-in rechargeable Li-battery in receiver
Built-in microphone & speaker / two way audio communication
Baby room temperature detection

Specifications:
Material: ABS(Acrylonitrile Butadiene Styrene) + Electronic components
Color: White

System General:
Operating Frequency: 2400MHz-2483.5MHz
Transmission Power: 17dBm Max
Monitor Sensitivity: -88dBm
Type of Spread Spectrum TX: FHSS
Type of Modulation: GFSK
Date Rate: 3Mbps
Transmission Range: Outdoor 300m (Eye of Sight)
Operating Temperature: 0℃+40℃
Operating Humidity: 85%RH
Environment Rating: Indoor use only

Camera:
Image Sensor Type: 1/3" Color CMOS Image Sensor
Effective Pixel: H: 640, V: 480
Lens: EFL=3.6mm.F=2.8
Viewing Angle (Diagonal): 70°
IR LED Type/Night Vision Distance: IR LED/5m
Power Requirement: DC 5V +/- 10%
Other Special Feature: Built in Microphone/ Speaker
Dimensions: 11.5x7cm/ 4.53x2.76"

Monitor:
Display Type/Size: Color TFT2.4"
Resolution (Pixel): 960x240(RGB)
Viewing Angle: H: 80°, V: 100 degree
Power Requirement: Adapter DC 5V ± 10%
Battery: 3.7V Li-polymer
Dimensions: Approx. 12.3x6.2x2.7cm/ 4.84x2.44x1.06"

Packaged Included:
1 x Baby Monitor
1 x Wireless Camera
2 x Power Adapter
1 x User Manual

• Two-way interactive system: Built-in microphone & audio, you can talk and listen to baby. 4 lullabies: Make baby fall into sleep more soft & fast.
• Automatic IR night view mode: except daytime, IR night view and top night light of receiver help take care baby, night light remote control by monitor. Night vision within 5m distance. Temperature monitoring display in receiver. prevent baby get a co
• Standby/Power Saving Mode: In standby mode (except no power), camera/sound seems to be turned off (power saving), it will activate when there is movement or noise. It will usually go into the screen monitoring by just press the a button
• Within 10m transmission range indoor use, dynamically select a channels to avoid interference from other 2.4GHz device.
• Built-in rechargeable Li-battery in Monitor, it is convenient to take to different rooms, battery can be used about 2 hours without charging, support low power alarm function.Tear off the screen-protectors before using.

Two-way interactive system: Built-in microphone & audio, you can talk and listen to baby. 4 lullabies: Make baby fall into sleep more soft & fast.GOCHANGE