Bang4buck Multiuse Oil Fuel Pressure Tester Gauge Kit for Car, Motorcycle, Truck, RV, SUV & ATV (0-300 psi Oil Pressure Tester)
DESCRIPTION
Meets Original Equipment Manufacturer (OEM) Standards
The connector joint has good airtightness and the design of the valve will let you feel more comfortable when operating it
Suitable for most vehicles
Description:
The Bang4buck Compression Tester Kit is a diagnostic tool which can help you identify damaged pistons, worn rings, burnt valves, and blown head gaskets. It works on conventional, electronic, and computerized domestic and import vehicles. It features a large 2-1/2-inch dial face with accurate Bourdon tube meter movement, dual-calibrated and color-coded scales which reads 0-300 P.S.I and 0-2100 k.P.a. It has a 11-in high-pressure rubber hose which is oil and grease resistant, a side-release valve which allows repeated tests without disconnecting the hose, and 14mm and 18mm adapters that fit most vehicles.
How do I check my oil pressure?
First you will need an oil pressure gauge. Then you will need to locate and remove the oil pressure sending unit from the side of the engine block. Insert the oil pressure gauge where the oil pressure sending unit was. Make sure it is out of the way but still visible then start the engine. You will receive a more accurate reading if the engine is at normal operating temperature. ( 180-220 )
All engine require a minimum of at least 10 psi per 1,000 rpm' s
0-300 PSI Gas Compression Tester: B01N63C1QR
Tranmission Engine Compression Tester: B01MFGBCX6
0-100 psi Gas Compression Tester: B01MFGX07Q
Oil pressure gauge kit: B01M2D4I2D
0-140 psi Fuel Compression Tester:B01MDUZ6VG
************NOTE: IT ONLY FITS FOR MOST VEHICLES, AND IF YOU ARE NOT SURE IF FITS OR NOT, PLEASE CONTACT US ANYTIME, THANKS!
- Pressure release valve for easy and safe disconnect
- Checks cylinder compression from 0 PSI to 300 PSI. (0 to 21kg/cm2)
- 11-inch rubber hose and 14mm and 18mm adapters which are installed in the gauge together
- Equipped with air-hold valve and gauge reset button. 2-3/4" Gauge dial face for easy to read
- Apply for conventional, electronic, and computerized domesticand import vehicles.Motorcycle, ATV, snowmobile, and marine applications