Cable for rear view camera connection to the OEM monitor of Toyota, Citroen and Peugeot (X-Touch / X-Nav). Using this cable you will be able to install the aftermarket camera Plug&Play without damaging the car wires.

Image from the rear view camera will automatically be displayed on the screen when reversing. The device is connected to the 8 pin socket (marked with an errow in the picture). After connection all OEM functions which work using this socket are preserved due to transit type of connection.

Note! The additionally installed rear view camera should be powered from ACC line (first turn of the key), otherwise the camera input will be not active. Depending on the type of the camera to be connected, namely the operating voltage, you can use power converter to decrease heating of the linear power supply which is built in the camera. In case the camera requires more than +6 V, connect the camera power directly to ACC line.

Compatibility
Toyota Aygo 2014, -
Peugeot 108, 2014 -
Citroen C1, 2015 -
Systems: X-Touch, X-Nav
Additional compatibility condition: 8 pin socket on the monitor for cable connection

• Rear view camera connection to X-Touch / X-Nav monitors
• Plug&Play installation of the aftermarket rear view camera without damaging the car wires.
• Image from the rear view camera will automatically be displayed on the screen when reversing
• After connection all OEM functions are preserved

Rear view camera connection to X-Touch / X-Nav monitorsGermes Lab.