30 Days Lowest Price Guarantee
Car Detector Brake Fluid Tester Pen 5 LED Auto Vehicle Automotive Testing Tool Diagnostic Tools Electronic Pen For DOT3/DOT4 TBK001
$ 15.01
DESCRIPTION
Specification: 1. To check the quality of brake fluid quality
2. 5 LEDs to indicate percentage of water in the brake fluid
3. Automatically power off
4. Operated by a LR03 AAA 1.5V battery ( Not included )
Tester Instructions:
1. the green LED lights = water content in the brake fluid H2O 2. the yellow LED lights = brake fluid water content H2O = 1.5% to 3%, can continue to use, test again six months later
3. the red LED lights = water content in the brake fluid H2O> 3%, can not continue to use the brake fluid needs to be replaced Red LED: change brake fluid
4.LED red flashing: battery replacement
5.LED yellow: low moisture content, check again in six months
6.LED green: brake fluid lines / cell row
Technical parameters:
Green: Battery OK, that is, brake fluid does not contain water
Green / yellow: brake oil in water content of less than 1%, better brake fluid performance, ease of use.
Green / yellow / yellow: brake oil in water content of about 2%, brake fluid can continue to use.
Green / yellow / yellow / red: brake oil in water content of about 3%, the proposed replacement of brake fluid.
Green / yellow / yellow / red / red: brake oil in water content of at least 4%, the brake fluid must be replaced immediately responsible for very dangerous.
Attention :
1. Replace battery if the gree LED not light p any longer after you press power on button.Wash the test probe with tab water after use.
2.In case of skin contact with brake fluid,thoroughly wash the affected skin or clothing with water.
3.Do not expose brake fluid to the atmosphere for a long time as the fluid is highly hygroscopic!
Packaging: 1* brake fluid tester
2. 5 LEDs to indicate percentage of water in the brake fluid
3. Automatically power off
4. Operated by a LR03 AAA 1.5V battery ( Not included )
Tester Instructions:
1. the green LED lights = water content in the brake fluid H2O 2. the yellow LED lights = brake fluid water content H2O = 1.5% to 3%, can continue to use, test again six months later
3. the red LED lights = water content in the brake fluid H2O> 3%, can not continue to use the brake fluid needs to be replaced Red LED: change brake fluid
4.LED red flashing: battery replacement
5.LED yellow: low moisture content, check again in six months
6.LED green: brake fluid lines / cell row
Technical parameters:
Green: Battery OK, that is, brake fluid does not contain water
Green / yellow: brake oil in water content of less than 1%, better brake fluid performance, ease of use.
Green / yellow / yellow: brake oil in water content of about 2%, brake fluid can continue to use.
Green / yellow / yellow / red: brake oil in water content of about 3%, the proposed replacement of brake fluid.
Green / yellow / yellow / red / red: brake oil in water content of at least 4%, the brake fluid must be replaced immediately responsible for very dangerous.
Attention :
1. Replace battery if the gree LED not light p any longer after you press power on button.Wash the test probe with tab water after use.
2.In case of skin contact with brake fluid,thoroughly wash the affected skin or clothing with water.
3.Do not expose brake fluid to the atmosphere for a long time as the fluid is highly hygroscopic!
Packaging: 1* brake fluid tester
- 1. the green LED lights = water content in the brake fluid H2O
- 2. the yellow LED lights = brake fluid water content H2O = 1.5% to 3%, can continue to use, test again six months later
- 3. the red LED lights = water content in the brake fluid H2O> 3%, can not continue to use the brake fluid needs to be replaced Red LED: change brake fluid
- 4.LED red flashing: battery replacement
- 5.LED yellow: low moisture content, check again in six months
