You are receiving 4 pieces/rings with bolt pattern of 5x5.5 or 5x139.7mm
Studs are 1/2"-20 and there is a 108mm center bore
Thickness is 2" per spacer for 4" wheel to wheel

Applications:
1980-2001 Jeep Cherokee
1993-1998 Jeep Grand Cherokee
1987-2006 Jeep Wrangler
2002-2012 Jeep Liberty
1986-1992 Jeep Comanche

Important Notes
- Your vehicle may have different thread pitch wheel studs than what's supplied with these wheel spacers. This means you would need to purchase different lug nuts for proper installation. Message us for more information prior to purchasing the items.
- Installation should only be performed by a trained professional.
- Make sure you get 6-8 FULL TURNS of the lug nuts before tightening.
- Failure to follow proper procedures may cause your lug nuts to come undone while driving!!!

- Your OEM/Factory wheel studs may extend past the surface of the spacer, if this is the case, you have 3 options...
1) Your wheels need to have cavities on the back between the mounting holes
2) The OEM/Factory studs will need to be shortened
3) You can purchase shorter studs and install them on your hub

- No returns or exchange once installed
- Please be sure to take the proper measurements before making your purchase. The Buyer is responsible for making sure that they choose the correct thickness so as to not cause the wheel/tire to rub against the fender of the vehicle.

• ★ Bolt Pattern: 5x114.3 (5x4.5). Hub Bore: 71.5. Spacer Thickness: 50mm (2 inch). Stud/Nut Thread Pitch: 1/2"
• ★ CNC Machined using High Quality Aerospace Aluminum
• ★ Designed to move the wheels further out from the hub, giving your vehicle a more aggressive stance & allows for better handling characteristics
• ★ Our wheel spacers are CNC machined to exact specification from the best quality aerospace aluminum available
• ★ Each set is hand tested and commercially packed.

★ Bolt Pattern: 5x114.3 (5x4.5). Hub Bore: 71.5. Spacer Thickness: 50mm (2 inch). Stud/Nut Thread Pitch: 1/2"Shenzhen Carrep Technology Co., Ltd