• C-TEC's two-wire CFP AlarmSense® fire panel is designed to work with Apollo's AlarmSense® range of detectors, call points, sounders and beacons. • By using different voltage bands for quiescent and alarm states, AlarmSense® components can be connected to the same pair of supply wires. • When powered and controlled by the CFP two-wire fire panel, this reliable technology takes all the complexity out of fire alarm system design, leading to quicker, less expensive and more flexible installation. Indeed, research shows an AlarmSense® two-wire system can achieve a 20-25% reduction of labour over a standard four wire conventional system. • AlarmSense®devices are acceptable for BS 5839-1 and BS 5839-6 systems making them particularly useful for fire protection in Houses of Multiple Occupation (HMOs). • Designed to comply with EN54 Parts 2 and 4 • Available with 2, 4, or 8 AlarmSense zone circuits (dependent on model purchased) • Auxiliary remote, auxiliary fire, fault and reset outputs • 'Class Change' and alert inputs • Four conventional sounder circuits (for use with non-AlarmSense sounders) • Low quiescent current - for extended standby times on small batteries • Intuitive user-friendly interface • Integral 1.5A switch mode PSU • Comprehensive fault diagnostic facilities • Push button access code entry to a wide range of engineering functions, including: Zone delay, Non-latching zones, Coincidence (double knock), Zone test • Ancillary connections provided for up to eight two-wire repeaters (one CFP761 network driver card required per system and optional CFP relay boards.

• C-TEC's two-wire CFP AlarmSense® fire panel is designed to work with Apollo's AlarmSense® range of detectors, call points, sounders and beacons.
• By using different voltage bands for quiescent and alarm states, AlarmSense® components can be connected to the same pair of supply wires.
• AlarmSense®devices are acceptable for BS 5839-1 and BS 5839-6 systems making them particularly useful for fire protection
• When powered and controlled by the CFP two-wire fire panel, this reliable technology takes all the complexity out of fire alarm system design, leading to quicker, less expensive and more flexible installation.

C-TEC's two-wire CFP AlarmSense® fire panel is designed to work with Apollo's AlarmSense® range of detectors, call points, sounders and beacons.C-Tec