Description:
Temperature sensor response time: 48 seconds.
Host sensors can detect 3 channels.
Wireless transmission range: 100m.
Frequency: 433 Hz.
Indoor temperature: -10°C to +50°C.
Outdoor temperature range: -40°C to +60°C.
Temperature accuracy: ±1.0°C.
Resolution: 0.1 °C/°F.
Record Max/Min value of indoor and water temperature.

Power consumption:
Material: ABS.
Receiver Weight: 93g.
Transmitter Weight: 179g.
Transmitter Size: 15×8.5cm(L×D).
.
Receiver Size: 11.8×7.3×2.2cm(L×W×D).
Minimum 12months for transmitter.
Receiver: 2xAAA 1.5V Alkaline batteries(not included).
Transmitter: 2xAA 1.5V Alkaline batteries(not included).
Battery life: Minimum 12months for base station.
Waterproof wireless thermometer transmitter to measure the temperature in swimming pool, pond and spa, etc.

Package Including:
1 x LCD Receiver.
1 x Floating Transmitter.
1 x Instruction Manual.

100% Brand New item from Cyberdyer, Free Shipping by USPS from Hong Kong; Hope you can get the best service from CyberDyer Store.

• 1. Customer instructions: Put the rubber ring into the inside groove, and then hold the rubber ring to prevent disengagement.
  With the lid twisting you must always keep the rubber ring at all times.
  
• 2. The purpose of tightening the cover is to prevent water from entering into the sensor, the unit will stop working once the water enters.
  there are some customers who have not noticed the importance of the rubber ring, so we must pay more attention to the installation steps of the cover.
  
• 3. The channel of remote floating sensor can be switched between 1,2 and 3 to optimize the transmission, measuring range water temperature: -40℃ to 60℃,
  indoor air temperature: -10℃ to 50℃, easy to read the temperature.
  
• 4. Pool sensor floats up to 30m depth and 433MHz wireless up to 100m in open field, meanwhile the thermometer can display indoor and water temperature,
  month, date, week, time and reception channel. Waterproof wireless thermometer transmitter to measure the temperature in swimming pool, pond and spa, etc.
  
• 5. No LCD display, cannot get the channel to sync to the pool temperature, etc. If you have the situation described above, please kindly reinstall the battery on
  the receiver first, then put the batteries on the sensor, both need to select channel 1. If the item still can not work please kindly contact us, thanks!
  

1. Customer instructions: Put the rubber ring into the inside groove, and then hold the rubber ring to prevent disengagement.
With the lid twisting you must always keep the rubber ring at all times.
CyberDyer