This is a great set of easy-reassembling LCD controller kit, which is used to turn a unused LCD panel into a desktop/PC monitor. It will be a surprise that your unused LCD will be of good use, and no longer be a waste. Or it is a very interesting things to make a monitor successfully by yourself. M.RT2270 is a LCD control board, it supports between 14 and 19 inch LCD panel with single /dual LVDS interface.And the resolution is up to 1440x900. * Please prepare VGA cable and power adapter for the controller board you bought. They aren't included in the kit. * This board requires DC 12V 3.3A input power for LCD size under 17inch, and DC12V 4A for LCD between 17 to 22 inch. The LCD cannot be lit up if the power current is not applied as stated. Install Tips: * Keep the backside away from metal subjects when the power is applied, or it may cause short-cut or damage of main IC. * Since the driver and voltage varies from different LCDs, please do not any change jumpers on the board, or use the kit for other LCD with different model number , otherwise you may damaged your LCD. Please consult us if you have any other question or want to use the kit for other LCD panel. link the key button board, (starts from left side, and leave some pins on the right blank), and connect inverter with controller board, then Connect 12V DC power to the board for LCD CCFL backlight lamp test. If the LCD panel is lit up, it means that backlight of the LCD is working, then you can turn off the power. If the LCD does not lit up, then the backlight is broken, you need to replace the lamps.

• Please prepare VGA cable and power adapter for the controller board you bought. They aren't included in the kit.
• This board requires DC 12V 3.3A input power for LCD size under 17inch, and DC12V 4A for LCD between 17 to 22 inch. The LCD cannot be lit up if the power current is not applied as stated.
• o protect this board from damage, high quality power adapter is recommend,
• Package Including: 1x LCD/LED Controller Board(M.NT68676 2.A) 1x CCFL Invertor Board or LED Invertor Board or None(Choose inverter according to the LCD model) 1x Keypad with Cable 1x LVDS Cable(Choose LVDS Cabel according to the LCD model)

Please prepare VGA cable and power adapter for the controller board you bought. They aren't included in the kit.Balance World Inc