Dr.Meter Temperature Soldering Iron Gun kit
- Temperature Range: 200℃ - 450 ℃(392℉- 842℉)
- Tweezers Type: ESD-10, ESD-15
- Soldering Iron Tips Type: 2 x 900M-T-B, 1 x 900M-T-I, 1 x 900M-T-K, 1 x 900M-T-4C and 1 x 900M-T-2.4D
- Solder Sucker: L 7.36 x Ø 0.75 in
- Solder Wire: 60/40 0.031 0.50 oz, melting point: 183℃
- Double-sided Solder Assist Tools: About 6.6 inches long, treated steel(tips) and plastic (handle)

How to Solder
Clean the parts to be joined.
Clean soldering iron tip and "tin" all faces of tip with a coating of solder.
Use the soldering iron to heat the weldment, such as PCB leads and pads, and keep the weldment heated evenly.
When the temperature is high enough, put the solder wire close to the joint, the solder will melt and flow freely.
Please remove the solder wire when the tin is enough.
Take away the soldering iron in a direction approximately 45° and power it off. Place it on the soldering stand to let it cool down

Cautions
Soldering iron will come out a smoke from the tip end for the first time, The smoke will stop in a short while and would never come out again
Use soldering stand and other aids to avoid burning fingers
Don't pull the soldering iron tip outward and use it in that way, which will shorten the heating element life
Don't apply too much solder unnecessarily
Please do not hang the soldering tips and place the tips down when heating, otherwise there is the risk of burning dissolved iron plastic handle
Be careful to pick up the solder iron tips or double-sided assist tools to prevent pricks or other injuries

• Wire Control ON/OFF Switch: Added ON/OFF switch on power cable, no need to unplug the plug if you temporarily stop use. LED indicator gives hint to avoid accidental burning
• Heat up Quickly: It heats up very fast with inner-heated ceramic induction technology within 2~3 minutes and has a temperature dial of 200℃~450℃ for you to adjust temperature easily
• 6 Interchangeable Tips: 6pcs soldering iron tips from broad chisel to super-fine for a variety of different objects(Tips: need use a plier to unscrew)
• Upgraded Features: Extra 6pcs double-sided solder assist tool can satisfy 12 different requirements and 2pcs tweezers can help you complete jobs better
• User Friendly: Rubber handle sleeve gives you a comfortable operation while tool bag enables portability and avoids missing any accessories

Wire Control ON/OFF Switch: Added ON/OFF switch on power cable, no need to unplug the plug if you temporarily stop use. LED indicator gives hint to avoid accidental burningDr.meter