eSUN 3D Printer Filament: PETG

Extrusion Temperature Range: 240 to 255 Celsius
Plate temperature: 80~90 Celsius or without heated
Printing speed: 30~60mm/s
Moving speed: 30~60mm/s
10 Solid/Opaque Colors(Solid Black, Solid White , Solid Red, Solid Silver, Solid Gold, Solid Gray, Solid Blue, Solid Green, Solid Purple, Solid Yellow) and 6 Semi-translucent Colors(Blue, Magenta, Green, Orange, Yellow, Natural).

Advantages of PETG: PETG is an excellent material which combines the advantages of other filaments. Odorless; Little shrinkage rate; hydrophobicity (Does not absorb water); Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility; Good glossy finish;

There are a lot of eSUN PETG clients and experience sharing since it was released in 2014.
Ask ESUN/INTSERVO if you need help dial it in.
PETG requires slower printing speed than other materials.

• 1KG net (approximately 2.2 lbs) Filament with Clear Spool
• eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant
• 3mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
• Recommended Extrusion/Nozzle Temperature 240C - 255C
• Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5"

1KG net (approximately 2.2 lbs) Filament with Clear SpoolESUN