Half Mortise Hinge - One leaf is mortised in the door and the other is surface applied to the frame. Reversible - Shipped as RH (Right Hand). Conversion from right hand to left hand is very simple; take the pin out of the knuckle, remove the bottom plug, turn the hinge over, replace the plug in the bottom and the pin in the top of the knuckle, and the handing is reversed. Commercial Grade Hinges are .134 thickness, use for 1 3/4" door thickness. Hinges have 2 ball bearings per hinge, Square Corners, 4.5" High - Made of Steel with Steel pin, Non-rising removable pin with button tip and plug - For Use with Doors with Normal usage and/or doors with closers. - Furnished standard with All machine screws (1/2" x 12-24 FPHM) - ANSI A8212 Non-Removable Pin (NRP) for Medium Security Feature: The Non-Removable pin has a small set screw in the body of the barrel. This set screw is tightened down against the pin. The pin has a groove in the position where the set screw makes contact, allowing the set screw to seat. The set screw is positioned so it cannot be reached unless the door is opened. If pin removal is necessary, the set screw is merely removed and the pin tapped from the bottom in the usual manner.

• Half Mortise Hinge - One leaf is mortised in the door and the other is surface applied to the frame. Can be used with Channel Iron Frames
• Hinges are .134 thickness - Standard Weight, For doors 1-3/4" thick, Two ball bearings per hinge, 5 Knuckle
• Steel prime painted hinge with Steel pin, Non-rising removable pin with button tip and plug
• For Use with Doors with Normal usage and/or doors with closers
• Non-Removable Pin (NRP) for Medium Security for Outswinging doors. Made in USA

Half Mortise Hinge - One leaf is mortised in the door and the other is surface applied to the frame. Can be used with Channel Iron FramesHager Companies