ISTA/D is updated until 04/2017 and SSS until 12/2009:
1.INPA v5.0.6 & NCSExpert 4.0.1 (advanced text-based diagnostic and coding) used on BMW factory

2.ISTA/D (ISID) v4.4.30 (Integrated Service Information Display) used by all dealers for diagnosis

Additional information:
1.ISTA/D is preinstalled and it doesn't require special skills to run or install from scratch, it's pretty much copy and run
2.ISTA/D will run natively on your windows
3.AUTOMATED SOFTWARE setup and technical support if needed
Models covered with this interface:
K-CAN models
BMW 1 Series E87
BMW 3 Series E46 E9X
BMW 5 Series E39 E60 E61
BMW 6 Series E63 E64
BMW 7 Series E38 E65 E66
BMW X Series E53 (E83 to 09/2006)
BMW Z Series E52 E85
Mini R50, R52, R53, R55, R56
Compatible D-CAN models
E60, E61 after 3 / 2007
E83 after 9 / 2006
E84
E81, E87 after 3 / 2007
E90, E91, E92, E93 after 3 / 2007
E70 (New X5), E71, E72
R56 (New Mini)
R57, R58, R59, R60, R61
ROLLS ROYCE
Covers all F, G and I series until 04/2017:
F01, F02, F03, F04, F06, F07, F10, F11, F12, F13, F15, F16, F18, F20, F21, F22, F23, F25,F26 F30, F31, F32, F33, F34, F35, F36, F45, F46, F48, F49, F52, F54, F55, F56, F57, F60, F80, F82, F83, F85, F86, F87. G11, G12, G30, G31, G38.I01, I12 PC requirements :
works on Win7 SP1, Win8, Win8.1 & Win10, 32bit and 64bit
1 USB port
At least Dual Core CPU
at least 2Gb RAM
about 54Gb free hdd space
Please Be Noted:
The 20pin adapter for older models is not included, also make sure you buy a good adapter as many of them have a wire missing which is used for Ignition detection

• 1.Connects to USB (1.5 m cable, creates virtual COM port);Supports Low-Speed CAN PT (100 kbit /s);Supports Double K-Line;Supports High Speed D-PT-CAN and CAN (500 kbit /s);Detects battery voltage through control line;Detects contact via control line;Works on USB port, USB RS-232 adapter not needed.
• 2.This Interface allows full diagnostic full switch of BMW's 1998 to 2017,modified to work for F,G,I series.Works with INPA Ediabas, NCSExpert, ISTA/D, (Progman) , ISID, ISSS and others.
• 3.ISTA/D(Program):Compatible for Win7 SP1, Win8, Win8.1 & Win10(32bit /64bit)
• IMPORTANT NOTICE!! Please unload your anti-virus software first before install the software so that the diagnose software can work normally. Because it needs a special program to work properly and the anti-virus software on PC may notify it as "virus" by mistake. Have no effect on your computer .
• Noted: Please make sure your laptop have full charge before installing the software,And please do not charge for laptop while diagnosing.

1.Connects to USB (1.5 m cable, creates virtual COM port);Supports Low-Speed CAN PT (100 kbit /s);Supports Double K-Line;Supports High Speed D-PT-CAN and CAN (500 kbit /s);Detects battery voltage through control line;Detects contact via control line;Works on USB port, USB RS-232 adapter not needed.HAIN