Operation Instructions:

Step 1: unlock and activate the solar light
Since the internal Li-ion rechargeable battery is locked from factory for safety shipment, therefore it is important to open the lampshade and then to click the "ON/OFF" button to turn on the light.

Step 2: choose a good location
The lamp is solar powered, a good location that facing south can guarantee the solar panel access to the strong sunlight directly without any shelter or glass in order to fully charge the device.

Step 3: mounting the solar lamp
Place the solar LED lamp in the location where needs light. Using a pencil or felt tip marker, mark the placement of hole of solar led lamp.
Choose a drill bit appropriate and drill the point where it is marker. Gently hammer the pillar-hinge into the hole and fasten the screws. Tighten the mounting screw securely.

Speciation:

Solar Panel: 2V, 0.26W
Li-ion Battery: 1.2V, 600mAh
LED: 6PCS
Color of Lamp: White or warm white
Charge Time: 6 hours
Working Time: 6-8 hours
Material: ABS
Waterproof: IP65
Net weight: 134 g
Gross Wight: 190 g
Color: Black / White
Warranty: One year warranty

Tips:

1. Remove the protective film from the solar panel before using;
2. Please fully charge before the first using;
3. Make sure turn on power switch for the first time before using;
4. Place or install the solar lamp under the sunlight without any shade.

• The solar lamp uses solar energy to power it.
• During of lighting depends on the intensity and time length for sunlight.
• The lamp will automatically turn on at night or at darkness and turn off in daytime.
• The solar panel transfer the solar power into electricity and then the electricity will be stored in the rechargeable battery to supply power at night.
• Solar panel can charge quicker under strong sunlight. It may cannot charge or charge slowly under weak sunlight. The charging time depends on the sunlight intensity.

The solar lamp uses solar energy to power it.IP