1.Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference.
2.This protuct does everything for you, and can be easily interfaced with any microcontroller, even one without an analog input.
3.This breakout board has the chip itself, with 10uF bypass capacitors and level shifting circuitry, all assembled and tested.
4.Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any breadboard or perfboard).

Description:

1. Measurement temperature range: minus 200 degrees Celsius to 1350 degrees Celsius above zero.
2. SPI interfaces, high-speed transmission.
3. The input voltage is 3V DC.
4. Direct digital output temperature value, no amplifiers, no ADC.
5. 14-bit resolution, 0.25 degree temperature accuracy.

Note:

1. Works with any K type thermocouple.
2. K thermocouples have about ±2°C to ±6°C accuracy.
3. Internal temperature reading.
4. SPI data output requires any 3 digital I/O pins.

Packing Included:
1 x Thermocouple Breakout Board

• Direct digital output temperature value, no amplifiers, no ADC.
• Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference.
• This protuct does everything for you, and can be easily interfaced with any microcontroller, even one without an analog input.
• This breakout board has the chip itself with 10uF bypass capacitors and level shifting circuitry, all assembled and tested.
• Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any breadboard or perfboard).

Direct digital output temperature value, no amplifiers, no ADC.IP