Intel EXPI9404PTL PRO/1000 PT Quad Port Low Profile Server Adapter, Retail
Intel EXPI9404PTL PRO/1000 PT Quad Port Low Profile Server Adapter, Retail
30 Days Lowest Price Guarantee

Intel EXPI9404PTL PRO/1000 PT Quad Port Low Profile Server Adapter, Retail

$ 673.11

DESCRIPTION

cable diagnostics Intel backing Connectors: 4x RJ-45 IEEE standards/network topology: 10BASE-T, 100BASE-TX, 1000BASE-T Wiring: Category-5, unshielded twisted pair (UTP), 4-pair Network Management: Wired for Management (WfM) baseline v2.0 enabled for servers DMI 2.0 support, Windows Management Instrumentation (WMI) and SNMP-manageable SMBus support Remote Installation Services (RIS) Diagnostics (loopback, testability, PHY register access) Advanced configuration and power interface (ACPI) 1.0 power management Wake on LAN support over PCI-Express PXE 2.0 enabled through boot read-only memory (ROM) Advanced Software Features: Adapter fault tolerance (AFT) Switch fault tolerance (SFT) Adaptive load balancing (ALB) Fast EtherChannel (FEC) Gigabit EtherChannel (GEC) Teaming support: Scales upto 8 connections Multiple teams: Supports 4 separate teams, maximum IEEE 802.3ad (link aggregation control protocol) Test switch configuration: Tested with major switch original equipment manufacturers (OEMs) PCIe Hot Plug/Active peripheral component interconnect (PCI) IEEE 802.1Q VLANs IEEE 802.3 (z, ab, u, x) flow control support TCP checksum offload - transmission control protocol (TCP), user datagram protocol (UDP), Internet protocol (IP) IEEE 802.1p TCP segmentation/large send offload Interrupt moderation Controller-processor: Intel 82571GB Data rate(s) supported per port: 10, 100, and 1000 Mbps Bus type: PCI-Express 1.0a Bus width: x4 lane PCI-Express, operable in x4, x8, x16 slots Bus speed (x4, encoded rate): 10 Gbps uni-directional; 20 Gbps bi-directional EEPROM-SPI and single EEPROM support Interrupt levels: INTA, INTB, INTC, INTD IEEE support: 802.3ab LEDs: 4 (1/port, link and speed) solid and blinking Typical power consumption: 12.096W (12 V @ 1.008 A) Cable distance: 100 m in Category-5 for 100/1000Mbps; and Category-3 for 10 Mbps Hardware certifications: FCC B, UL, CE, VCCI, BSMI, CTICK, MIC Dimensions (WxLxH): 2.713 x 6.601 x 3.153 inch / 6.89 x 16.77 x 8.00 cm
  • Advanced configuration and power interface
  • Supports 4 separate teams, maximum
  • Tested with major switch original equipment manufacturers
Advanced configuration and power interfaceIntel

YOU MIGHT ALSO LIKE