Use these modular flow sensors and totalizers for any type of process or laboratory application. The flow sensors measure low viscosity liquids from 13 mL/min up to 10 L/min. For a complete system, order a flow sensor, power supply, and flow display/totalizer. These sensors use an optical beam, turbine wheel, and photodiode translator to generate a 7.5 V pulse output that is proportional to the flow rate. Sensors also provide a highly linear 0 to 5 VDC output signal for control or data logging purposes. Note: Due to the optical pick-up, the sensors should not be used with opaque liquids. Ryton® PPS sensors have wetted materials of polyphenylene sulfide (PPS), glass, sapphire, and Viton®. Brass sensors have wetted materials of brass, glass, and Viton. PTFE sensors have wetted materials of PTFE, sapphire, and Kalrez. A separate power supply is required for these flow sensors-(order separately). If a Ryton® PPS or brass sensor is being used with an existing power supply, order cable assembly 32704-52 (PTFE models already include their own cable assembly). System design is flexible to suit a wide range of applications Brass sensors for high pressure; PTFE sensors for high-purity systems; Ryton® PPS sensors for aggressive liquids. Interface with data acquisition systems. Dual signal outputs to monitor and record flow rates and totals

• Accuracy: ±1% full-scale
• Output: 0 to 7.5 V pulses to drive rate indicator/totalizer; 0 to 5 VDC for datalogging
• Output (Voltage): Yes
• Repeatability: ±0.2% full-scale
• Max Operating Temperature (DegreeF): 122

Accuracy: ±1% full-scaleCOLE-PARMER