IMPORTANT: When purchasing a TV MOUNT, measure the television's mount HOLE WIDTH and HEIGHT and verify that this WIDTH/HEIGHT will work with the mount you are viewing.

Adjustable Tilting up/down (+15 degree forward, -5 degree Back) and Swivel left/right (+-90 degree) Wall Mount Bracket for LCD Plasma (Max 110Lbs, 32~50inch) - This is an angle adjustable wall bracket for LCD or Plasma TV's. This Flat Wall Mount supports most any 32in to 50in flat panel screen and plasma TVs up to 110 lb weight that comply with VESA mounting standards.

Compatibility:

• Will fit most small to mid-sized flat panel plasma and LCD TVs with mounting patterns up to VESA 750x500.
  
• Mounting holes on television should be 27" or less apart horizontally & 19" or less apart vertically
  
• Maximum weight capacity: 110lbs/50kg
  Dimensions:
  
• Wall Back mount plate width: 17.71"
  
• Wall Back mount plate height: 6.77"
  
• TV Front mount plate width: 27.75"
  
• TV Bracket arm height: 20.47"
  
• Measurements are from edge to edge. Mounting points for bolts will be shorter.
  Range of Motion:
  
• Tilt: up to 5 degrees upward & 15 degrees down (variable) (Lock In Fixed Position)
  
• Swivel: -90 to +90 degree rotation (depending on TV size and location from wall)
  
• Mount continues to allow for left/right swivel after mounting, with tension controllable via supplied hex tool
  
• Extension from wall: 5.0" to 25"
  Design & Construction:
  
• Solid toughened steel construction
  
• Durable scratch resistant
  
• Black Finish
  
• Easy installation
  Included in Box:
  
• Mount
  
• Mounting hardware (Screws to go into back of TV & Fittings for brick and stud walls)

• SHIPPING WEIGHT (Each): 23.75 lbs.

SHIPPING WEIGHT (Each): 23.75 lbs.My Cable Mart