The Adapter, that I came up is having two parts. 1) The Sleeve. 2) The Piercing Tube. Both the parts are built from solid Brass, for Durability. The Sleeve: Sleeve is a cylindrical part , which Anchors the P-51 Collectors tail, with sufficient tightness at the Front End (smaller opening). Then the Sleeve accommodates the Clutch ring and the "O"Ring. Hooded Section (Shell) of the pen can be screwed on the Sleeve. The Sleeve takes the twist converter at the Rear End(Large Opening). Then the barrel of the Pen can be screwed into the position. Piercing Tube: It seats inside the aperture of the Sleeve, shown in the Picture-3. It takes the opening of the Twist Converter. The converter Adapter comes to you with Pre-Assembled Piercing tube. Let the Breather tube Pass through the aperture of the Piercing Tube, see Picture-4, from the Front End of the Adapter (Smaller Opening). Continue to Insert the tail of the Collector into the smaller opening of the Adapter Sleeve. It fits tightly, without any gap, between the walls. Then place the Clutch Ring in Position, slide the "O" Ring, Beneath the Clutch ring, see Picture-5. Now, Screw on the Hooded section (Shell) of the Pen, see Picture-6.

• Brass Made Converter Adapter For Parker 51

Brass Made Converter Adapter For Parker 51RAMAKRISHNA PEN WORKS