Pearl Cast Iron Shallow Well Self-Priming Jet Pump FEATURES An exclusive diffuser design with flow control device provides for compact construction, fast self-priming capability and low noise. Reliable with new design features the JCC is more robust and forgiving when temporary abnormal operating conditions may exist. The JCC is smaller than conventional pumps of a similar type, allowing for installation in restricted spaces and providing for easier retrofit applications. Fast air evacuation reduces the risk of air-pockets developing at the mechanical seal preventing the danger of seal failure due to a lack of flushing and cooling. APPLICATIONS For drawing water out of a well. For lifting water containing air or other gases. For increasing water pressure from flooded suction applications. As pressure boosting pump for central water systems with low pressure (follow local specifications if increasing network pressure). For garden use. For washing with a jet of water. CONSTRUCTION Close-coupled self-priming shallow-well jet pump with built-in ejector. Connections: threaded ports NPT. MOTOR 2-pole induction motor, 60 Hz (n 3450 rpm). Three-phase 230/460 V. Single-phase 115/230 V, 115 V, 230 V. Capacitor inside the terminal box. Insulation class F. Protection IP 44. MATERIALS Pump Casing: Cast iron GJL 200 EN 1561 Casing Cover: Cr-Ni steel 1.4301 EN 10088 (AISI 304) Impeller Brass: P-Cu Zn 40 Pb 2 UNI 5705 Wear Ring Impeller-Diffuser: Cr-Ni steel 1.4301 EN 10088 (AISI 304) Diffuser: PPO-GF20 (Noryl) Ejector: PPO-GF20 (Noryl) Shaft: Chrome Steel 1.4104 EN 10088 (AISI 304) Mechanical Seal: Carbon - Ceramic - NBR

• Pearl Cast Iron Shallow Well Self-Priming Jet Pump
• Power:1 hp, Phase:1
• Volts:115/230v, Max. Amp:13.6/7A
• Suction: 1", Discharge: 1"
• Two Year Manufacturer Warranty

Pearl Cast Iron Shallow Well Self-Priming Jet PumpPearl