Boshi Electronic Instrument

Description
World Initial Magnetic Digital Brinell and Rockwell hardness tester, which can make accurate Brinell hardness test with conventional indentation method of ISO 6506.2 and ASTM E 10. It can also make rapid Brinell hardness test with depth-measuring method of ASTM E 103, and read hardness value directly. At the same time it also can do Rockwell hardness test according to Rockwell hardness testing method in ISO 6508.2 and ASTM E18. These functions can meet the demand of precise and rapid Brinell hardness testing on-site of large steel and iron parts.
Simplified operation of Rockwell hardness and depth-measuring Brinell hardness, only need to load the total test force remain for several seconds and then unload the total test force to finish the test, it is very simple and high efficiency.
This instrument can check and calibrate the accuracy on-site by precise indentation method at any time.

Technical Datas
Initial Test Force: 10kgf
Total Test Force: 60 kgf, 100 kgf, 150 kgf,187.5kgf
Testing Range: 20~88HRA, 20~100 HRB, 20~70 HRC, 150~ 400 HBW
Testing Resolution: 0.1 HR or 1 HBW
Indication Error:Complwith ISO and ASTM standards Repeatability Error: Comply with ISO and ASTM standards
Test Force Error: ≤ ± 1%, Comply with ISO and ASTM standards
Operating Temperature: 0 ~50℃
Dimension: Flat : Area ≥ 195mm x 60 mm
                                  Thickness : ≥ 5 mm
Cylinder: Diameter ≥ 60 mm Length ≥ 200 mm
                          Thickness ≥ 8 mm
          Note
All products have been checked and packaged in good condition before shipping.
After your order is confirmed,the product will be sent to your hands for 7-13 workdays.
If you have any question, please feel free to contact with us . We will try our best to give you a satisfactory solution.

• 1.High Reliability:With advanced imported sensors as well as high integration, high stability electronic components to keep the high reliability of the hardness tester.
• 2.High efficiency depth-measuring methods:It can make rapid Brinell hardness test with depth-measuring method of ASTM E103, and read hardness value directly.
• 3.Brinell and Rockwell two functions:One hardness tester with Brinell and Rockwell two functions can meet the demands of most manufacturing users.
• 4.Simple test methods:Test by absorbing to iron and steel parts, and it can finish the test by unilaterally touching the parts. It can test any dimension parts, especially steel tubes and weld on pipes.
• 5.Light and easy to carry:Total weight 5.3kg of the tester, it is the smallest Magnetic Digital Brinell and Rockwell hardness tester so far.

1.High Reliability:With advanced imported sensors as well as high integration, high stability electronic components to keep the high reliability of the hardness tester.Boshi