Operation
● Print the design on the Parchment with a laser printer.
● According to the size of the design, cut the isolating film with appropriate size.
● Parchment,isolating film, stamp pad, the three order:Parchment at the top, the Print face down, the middle tier is isolating film, the third layer is the stamp pad, hold well with the clamp and put into the machine.
● Switch on the power, the machine began to charge, when the voltage up to 430-460V, shut off the power, press the start button, complete exposure.
● Take out the clamp, then take out the photosensitive pad.
●Put the pad into the stamp holder, inject ink, a stamp is done.
Items Included:
1set of photosensitive seal machine kit (030091),which including the following items:
1) 1 set of photosensitive seal machine
2) 5 pc 42mm circle stamp holder
3) 20 pc42mm rubber stamp pad
4) 5 pc rectangle stamp holder 30*40mm
5) 20 pc rectangle stamp pad 30*40mm
6)3 bottles photosensitive seal ink Back,Red, Blue
7) 20 sheets A4 Parchment
8) 20 sheets A4 isolating film

• Reasonable design. Light in weight. Smooth action.
• Exposure area: 4.7*2.1" (12×8 cm) ; Voltage: 110V
• Outside size: 15*9.8*3.5" (38×25×9 cm) ; Machine size : 14.4"x10.3"x23.6"(37x26x60cm)
• Weight: 17.6Lb (8kg) ; Net weight: 22.00Lb(10kg) ; Shipping weight: 22.24 Lb(11kg)
• Package dimensions :15.7"x12.6"x15.7" (40x32x40cm)

Reasonable design. Light in weight. Smooth action.Tools