DAQduino is built with Arduino form of external ports connection that fulfilled 3rd party Arduino extension boards. Great tool for signals monitoring (as oscilloscope), data acquisition and circuit troubleshooting at 1mSec/samples period.

Peripheral Features:
• 19x IO Port (6x 10bit ADC pins, 2x 10 bit PWM/Freq/DAC pins)
• Serial port emulation (UART Baud Rates: 300 bps to 115.2 kbps)
• Maximum Voltage: 5Vdc
• 100mA current output at VDD pin with over-current protection
• 20MHz oscillator
• Green LED - power on indicator
• 2x LEDs (Green, Red) - status indicator
• ICSP Connector - on-board PIC programming
• Switch Mode Selection - Boot or Normal mode

SmartDAQ v1.4 Features:
• Sampling channel: 6x Analogs (10 bits ADC) + 7x Digitals (Input/Output)
• Maximum Sampling rate: 1KHz or 1mSec/Samples
• Sampling voltage: 0V - 5V (scalable graph) at 5mV Resolution
• Sampling period:
• mSec: 1, 2, 5, 10, 20, 50, 100, 200, 500
• Sec: 1, 2, 5, 10, 20, 30
• Min: 1, 2, 5, 10, 20, 30, 60
• Trigger Mode: Larger [>], Smaller [• Sampling Mode: Continuous, Single
• Logging Function:
• Save Format: Text, Graphic, Both
• Start Time: Normal, Once Trigger, 24-Hour Clock (Auto Run)
• End Time: Unlimited, Data Size, 24-Hour Clock (Auto Stop)

Accessories List:
• 28 Pin PIC: PIC18F2550
• Preloaded Firmware: HID Bootloader + iCP12 DAQv1.2 Firmware
• iCP12 firmware can be updated using Microchip USB HID Bootloader via USB port
• NO programmer is required!

• Arduino form connection, easy interfacing, high performance and user friendly device. Integrated with PIC18f2550 28-pin flash USB PIC MCU.
• 13x io port (6x 10bit adc pins, 2x 10 bit pwm/freq/dac pins), On board Female Mini USB and Micro USB Type B connector, serial port emulation (uart baud rates: 300 bps to 115.2 kbps), 15Vdc maximum input voltage, 500mA current output at Vdd pin with over-current protection.
• Preloaded with HID bootloader and iCP12A DAQ firmware. Supported by Android Apps.
• Free SmartDAQ software with 13 sampling channel [6x analogs (10 bits adc) + 7x digitals (input/output)] at 1khz or 1mSec/samples maximum sampling rate. Sampling voltage: 0v - 5v (scalable graph) at 5mv resolution.
• Free softwares provide: SmartDAQ, ioControl, serialComm, pwmGenerator, adcStream

Arduino form connection, easy interfacing, high performance and user friendly device. Integrated with PIC18f2550 28-pin flash USB PIC MCU.iCircuit Technologies