pkg SOUNDSTREAM T5.122 12" 2000W SUBWOOFER SPEAKER + TN1.1200D BASS AMPLIFIER

• T5.122 - Overcompensating Motor Structure for Increased Magnetic Strength | 12mm T-Yoke and Top Plate Improve Low Frequency Dynamics | Vented T-Yoke and Frame Reduces Voice Coil Heat Build Up | Non-magnetic Non-resonate Die-Cast Aluminum Frame | 3" 4-Layer Voice Coil with Direct Connect Wire Increases Power Handling
• High Temperature Tolerance Adhesives Resist Thermal Failure | Non-Transfer Spruce Pulp Cone with UV and Chemical Protection | Stitched and GLued Surround/Cone Joints for Strongest Bonding | Extended Excursion Polyether Foam Surround with UV and Chemical Protection | Dual Poly-Cotton Suspension Dampen VOilent Accelerations
• 1-pc Gasket / Trim Ring with Concealed Mounting Holes Included | RMS Power Handling: 1,000W | Max Power Handling: 2,000W | Voice Coil Impedance: 2-Ohm + 2-Ohm | Mounting Depth: 7.25" | Optimum Sealed Box Volume: 1.50ft3 | Optimum Ported Box Volume: 2.50ft3
• TN1.1200D - Power Handling: 600W x 1 @ 4-Ohm | 1050W x 1 @ 2-Ohm | 1200W x 1 @ 1-Ohm | 102dB Signal-to-Noise Ratio | 114 Damping Factor | 32dB Stereo Channel Separation | 200mV - 6V Input Sensitivity | 20-4kHz 12dB High Pass Crossover | 50-5kHz 12dB Low Pass Crossover
• Dimensions: 6.625" W x 1.75" H x 12.625" L | Class D Full Range SMT Circuitry | Double-Sided Composite Epoxy PCB | Source Input Selector | Three-Way Protection Circuitry | Delayed On/Off Circuit | Tri-Mode Capable | Band-Pass Crossovers | Direct Wire 8GA Power and Speaker Terminals | 0GA Reducer Terminal Included

T5.122 - Overcompensating Motor Structure for Increased Magnetic Strength | 12mm T-Yoke and Top Plate Improve Low Frequency Dynamics | Vented T-Yoke and Frame Reduces Voice Coil Heat Build Up | Non-magnetic Non-resonate Die-Cast Aluminum Frame | 3" 4-Layer Voice Coil with Direct Connect Wire Increases Power HandlingSoundstream