This LED is suitable for light DIY mutirotor, airplane, helicopter, RC car... etc.
It can use as navigation light and Indicator light.
The LED adopts 6 pieces of RGB 5050 lamp beads, with DIP switch on board. According to toggle different switch combination, the LED can switch among 7 colors.

Working Voltage: 10-13V DC (3S LIPO, 12V BEC)
Dimension: φ30mm
Hole Pitch: 10mm
Hole diameter: 3mm
Weight: 2.4g

Note:
1. The parcel comes with a 30cm black and red power wire. User can cut it to the proper length according request.
2. Pay attention to the "+" and "-" and insulation
3. Toggle the switch on to different channel to choose 7 color
4. We suggest use double side tape to paste the LED lights on frame

When the output is 12V, the power and current of the LED:
B ON =blue, 0.6W, 0.05A
R ON =red, 0.6W, 0.05A
G ON =green, 0.6W, 0.05A
B+R ON =purple, 1.2W, 0.10A
B+G ON =cyan-blue, 1.2W, 0.10A
R+G ON =yellow, 1.2W, 0.10A
B+R+G ON =white, 1.8W, 0.15A
Package includes:
2x RGB LED lights board X6-12V
2x 300mm red/balck wire

• This LED is suitable for light DIY mutirotor, airplane, helicopter, RC car... etc.
• It can use as navigation light and Indicator light.
• The LED adopts 6 pieces of RGB 5050 lamp beads, with DIP switch on board.
• According to toggle different switch combination, the LED can switch among 7 colors.
• Working Voltage: 10-13V DC (3S LIPO, 12V BEC) ;Dimension: φ30mm ;Hole Pitch: 10mm ;Hole diameter: 3mm ;Weight: 2.4g

This LED is suitable for light DIY mutirotor, airplane, helicopter, RC car... etc.Rcmodelpart