Specifications:
Charging time:8hours Working time:6-8hours,total working time no more than 10,000hours
Switch: power on/off
Led quantity: 200pcs
Flash mode:steady or blinking
Battery: 1.2V 600MA
Working temperature: -20 Centigrade to +60 Centigrade
Length of String: 72ft
How does to use it?
Connect the spike with the control box.
Insert it into the ground by using the spike,and insure solar panel can fully expose to the sunlight.
Fasten lamp string at your target location,such as trees or show window.
Tear off the protection film, the lamp string can work normally by press \"on/off\" button.
The flashing mode can be changed by press \"MODE\" button to blinking.
Notes:
The work time will be effect by the weather condition,the season and the location.It is normal, because the conversion efficiency of solar panel is effected by the light intensity.
The lamp string will be charged only it\'s in \"on\" mode. It is waterproofed, but limited by rain and moisture.(it cannot stay too long in the water.)
Huge impact and knock must be avoided, otherwise, it will be demaged.
One side of the spike is very sharp, please be carefully when you are using.

Included:
1 x Solar Panel
1 x 21 cm Spike
1 x 200 LED Solar String Lights

• Specifications:
• Charging time:8hours Working time:6-8hours,total working time no more than 10,000hours
• Switch: power on/off
• Led quantity: 200pcs
• Flash mode:steady or blinking

Specifications:QJ