1.Remark:
The Tecsun AN-100 is a passive, fully adjustable indoor antenna for the AM broadcast band in home, car BCL receivers. This inductive coupling makes it easy to use with most portables that have an AM Ferrite bar antenna. Simply placing this antenna near the radio will improve reception! Just adjust the AN100 tuning knob for maximum gain. There is also an output jack for a "wired" connection to radios with AM antenna terminals. The supplied cable has a 3.5mm plug at both end.

2.Features:
(1)Loop wide : 35mm
(2)Loop diameter : 228mm / 9 inch
(3)Working frequency coverage: 520-1710 KHz
(4)No battery or the external power supply required
(5)Dedicated tuning knob designed for the frequency tuning
(6)Enhance Medium Wave receive capacity, improve Medium Wave receive effect, suitable for weak Medium Wave receive situation
(7)Easy to setup and use with the radios which has the inside ferrite Medium Wave antenna or has the external Medium Wave antenna input socket
(8)Built-in output socket to output the signal directly for using with the radio which has the External Medium Wave antenna input socket (the connection cable coming in the package has the 3.5mm stereo standard plug only)

3.Usage:
(1)Connect the AN-100 medium wave annular antenna to the audio modulator, car radio or medium wave line-in socket of BCL radio. If the radio without medium wave line-in socket, the annular antenna can be placed nearby the radio and closed to the radio's MW build-in antenna.
(2)Set the radio at medium wave band. Then roll the tunable button on AN-100 medium wave annular antenna to receive the best frequency signal until the sound from broadcasting channel is clear and stable.
(3)AN-100 medium wave annular antenna can perform its best function by moving to the right direction.

4.Package Includes
1 x TECSUN AN-100 Antenna
1 x Connecting cable
1xEnglish manual

• 1. For All Brands Like Kaito,Sony,Panasonic,Grundig,Eton and More
• 2. Working frequency coverage: 520-1710 KHz. Dedicated tuning knob designed for the frequency tuning
• 3. Enhance Medium Wave receive capacity, improve Medium Wave receive effect, suitable for weak Medium Wave receive situation
• 4. Easy to setup and use with the radios which has the inside ferrite Medium Wave antenna or has the external Medium Wave antenna input socket
• 5. Built-in output socket to output the signal directly for using with the radio which has the External Medium Wave antenna input socket (the connection cable coming in the package has the 3.5mm stereo standard plug only)

1. For All Brands Like Kaito,Sony,Panasonic,Grundig,Eton and MoreSaferCCTV