Savvypixel 2.0 Megapixel HD TVI CVI Security Bullet Digital CCTV Cameras TVI/CVI/AHD/CVBS 4 in 1 1080p Analog Camera Surveillance Video Home System Outdoor with 42 IR 2.8-12mm Varifocal Zoom Lens
DESCRIPTION
1.Using high-performance image processing chip,with OSD function
2.HD-AHD/CVI/TVI&CVBS HIGH IMAGE,Effective Pixels:1920x1080,IR-CUT,low illumination level
3.25*3pin standard por,low-power and low stream
4.500M losses transmission without delay
5.Support motion detection and privacy zone
6.Use OSD button line control AHD/TVI/CVI/CVBS
Technical Parameters:
Sensor type:1/2.7''CMOS
Signal System:PAL/NTSC
Resolution:1920x1080P
IR Distance: 42*Φ5 IR LED,Up to 35m
Video Output: default TVI OUTPUT ,HD-TVI(1080P),(AHD/TVI/CVI/CVBS)
Day&Night Switch:Support (ICR)
Frame Rate:25fps(50Hz),30fps(60Hz)
Min Illumination:0.1ux(LED ON) 0.01ux(0-3ux LED)
S/N Ratio:>52dB(AGC off)
Electronic Shutter:Auto 1/50s(1/60s)~1/100,000s
White Blance:Auto
Gain Control:Auto
Working Environmeng:-20℃~-50℃,-10%~90%(humidity)
Power Supply:DC12V(±10%)
IR Voltage:DC2-8V
Operation Mode:
CVBS:Turn UP and hold on 5 seconds
CVI:Turn Down and hold on 5 seconds
AHD:Turn Left and hold on 5 seconds
TVI:Turn Right and hold on 5 seconds
Trouble shooting:
1.Problem:Image normal in the day while vague or being interfered by horizontal stripes at night
Solution:It is the reason that power is not enough or power cable is too long.Change power
supply or shorten power cable.
2.Problem:No iamge
Solution:There are three reasons:if it is Wrong connection to the video cable,you need
reconnect;if power gets problem,you need change power supply;if having not connected to
power supply,you need to plug in.
- 1/2.7" 1080p TVI image sensor for true HD analog video
- 2.8-12mm Varifacal lens allowing for a larger viewing area
- 114ft IR range with superior video quality in complete darkness
- 400m lossless transmission without delay
- The dome analog camera has 4 MODES for video output: 2mp AHD/CVI/TVI/CVBS (Default TVI Mode) ,it can be compatible with 2mp AHD/CVI/TVI/CVBS DVR or XVR.Please make the DVR and the camera keep the same signal. If you use 2mp CVI camera,please use 2mp CVI DVR or 2mp XVR.