SPTA 7inch (180mm) Buff Pad Polishing Pad For Car Polisher Pack of 5Pcs

Material: Foam
Color:White,Blue,Yellow,Black,Orange
For car polishing
Yellow Low Profile Cutting Foam Pad
- Use this pad to apply compounds or polishes to remove severe oxidation, swirls, and scratches. It is the most aggressive and should only be used on oxidized and older finishes. Always follow this pad with an orange or white pad and a fine polish to refine the paint until it is smooth.

Orange Low Profile Light Cutting Foam Pad
- Firm, high density foam for scratch and defect removal. Use this pad with polishes and swirl removers. It's an all around pad that will work on most light to moderate imperfections.

White Low Profile Polishing Foam Pad
- Less dense foam formula for the application of waxes, micro-fine polishes and sealants. This pad has very light cutting power so its perfect for pre-wax cleaners.

Black Foam Polishing Pad
Soft, high strength foam for waxing or glazing

Blue Low Profile Finessing Foam Pad
- Flat pad has soft composition for applying glaze, finishing polish, sealants, and liquid waxes. Flat pad provides full contact with paint surface to minimize the pressure applied by the user.

• Slows rate of polish absorption - the pads are slow-to-absorb products and therefore the paint benefits from a longer working time; the same is true of liquid waxes and sealants
• Improves operator control - pockets gradually release polish as needed by the operator; since these areas are not absorbing polish, they serve as little reservoirs until the excess polish is needed
• pockets break up the smooth surface of the foam to eliminate the sticking and skipping that occurs when two perfectly flat surfaces meet
• Creates less heat; pockets provide several points where the foam is not completely touching the paint - this reduces friction and therefore heat is generated between the pad and the paint
• OEM approved; OEM tests confirm pads out perform convoluted pad designs,Size:7inch (180mm)

Slows rate of polish absorption - the pads are slow-to-absorb products and therefore the paint benefits from a longer working time; the same is true of liquid waxes and sealantsSPTA