Part No.:S7045 Connection Size (In.):5/8 Diameter (In.):4 Height (In.):10.38 Capacity R22 0 F (Lb.):4.1 Shipping Weight (Lbs.):5 Connection Type:ODS Index Values:Henry, Suction Accumulator, Oil, Refrigeration, Components Maximum Operating Pressure (psi):450 psi Orientation:Vertical Recommended Tonnage Limits R22 + 40???F Max:1.9 Recommended Tonnage Limits R22 + 40???F Min:0.4 Recommended Tonnage Limits R404 -20 40???F Max:0.6 Recommended Tonnage Limits R404 -20 40???F Min:0.1 Vendor:Henry Technologies Vendor Number:S-7045 Web Description:Suction accumulator, 5/8" ODS, 4.1 lbs holding capacity R22 Web Search:Suction accumulator, 5/8" ODS, 4.1 lbs holding capacity R22 Accumulators have a metering ejector device that picks up liquid, vaporizes it, and returns it to the compressor. Selection of a suction line accumulator should be made on the basis of the following three capabilities. The accumulator should have an adequate liquid holding capacity and normally not be less than 50% of the system charge. A second consideration should be the ability of the accumulator to perform without excessive pressure drop to the system. Minimum tonnage is the lowest flow that will insure proper oil return. Finally an accumulator should have the capability of returning liquid at the proper rate and under a range of load conditions.Add a heat element for low temperature applications. May be insulated to prevent condensation. Vertical orientation Maximum working pressure: 450 psi

• Model:
• S7045

Model:Henry Technologies