Pattern Name: DC12V-96V Acid Lead Battery Voltmeter Monitor

Features:
Power supply voltage: DC 6-120V (Not exceed the maximum input voltage of 120V, otherwise it will damage this meter)
Measuring voltage: DC6 - 120V (The resolution of following 100V is 0.1V, above 100V is 1V)
Capacity Resolution: 1%
Operating Current: Display: color LED
Dimensions: 48 × 29 × 21 mm
Cutting size: 45.5 × 26.5 mm
Measurement rate: ≥500mS / times
Voltage measurement accuracy: 1% (+/- 2 words)
Lead length:> 150mm

Extreme working conditions:
Minimum power supply: DC 6V
Maximum power supply: DC 120V
Operating temperature: -10 - +65°C (14 - 149°F)
Operating humidity: 10 - 80% (non-condensing)
Operating pressure: 80 - 106kPa
Sunshine exposure: no direct exposure

Wiring:
Connect the red wire of this meter to the battery's positive (+), the black wire to the battery's negative (-), then the meter display real-time capacity, voltage and the percentage of capacity. Reverse polarity will not damage, just display nothing.
Default setting:
Battery type: Lead-acid battery (12V system), 12V, "1" batteries in series
Display Mode: Capacity + Voltage and percentage of the capacity cycle

Package Including:
1pcs DC12V-96V Acid Lead Battery Voltmeter Monitor

• This DC12V-96V Acid Lead Battery Voltmeter Monitor is widely used in measuring the voltage of multiple categories Battery (can be re-set). There are 3 different display modes, capacity + voltage, capacity + percentage and capacity + voltage & percentage cycle (default), can be selected via the white button on the back
• Power supply voltage: DC 6-120V (not exceed the maximum input voltage of 120V, otherwise it will damage this meter), measuring voltage: DC6 ~ 120V (accuracy: 1% +/- 2 words), with reverse polarity protection, reverse polarity will not damage, just display nothing. LED flashing to alarm when low capacity. Operating current:
• Clearly color LED display different battery capacity. Top row 8-Segment red-green LED bar is display capacity, the bottom row 8-Segment red LED is display the value of the voltage and the percentage, green "V" and blue "%" are on the right of the value
• The minimum power supply for the meter is DC 6V, the maximum is DC 120V. Operating temperature: -10 - +65°C (14 - 149°F), operating humidity: 10 - 80% (non-condensing), operating pressure: 80 - 106kPa, sunshine exposure: no direct exposure
• This meter can measure the capacity of Lead-acid battery, Lithium-polymer battery, Lithium-iron phosphate battery, NiMH battery. It is suitable for solar energy systems, electromobile, car batteries, inverter, electric forklift, tour electric bus, electric car, battery-powered mobile device etc. Note: Do not install this meter in the line with the xenon lamp

This DC12V-96V Acid Lead Battery Voltmeter Monitor is widely used in measuring the voltage of multiple categories Battery (can be re-set). There are 3 different display modes, capacity + voltage, capacity + percentage and capacity + voltage & percentage cycle (default), can be selected via the white button on the backUCTRONICS