Veneers refers to thin slices of wood that typically are glued onto core panels to produce flat panels such as doors, tops and panels for cabinets, parquet floors and parts of furniture.

Plain Slicing
The half log, of flitch, is mounted with the heart side flat against the guide plate of the slicer and the slicing is done parallel to a line through the center of the log. This produces a figure to that of plain sawn lumber.

Quarter Slice
The quarter log, or flitch, is mounted on the guide plate so that the growth rings of the log strike the knife at approximately right angles. This produces a series of stripes, straight in some woods, varied in others.

Rift Cut
Rift-cut veneer is produced in the various species of Oak. Oak has medullary ray cells, which radiate from the center of the log like the spokes of a wheel. The rift, or comb grain effect, is obtained by slicing slightly across the medullary rays. This accentuates the vertical grain and minimizes the flake.

• A popular furniture wood. Is often stained to match American Black Walnut.
• White to pale red to reddish-brown sapwood with dark stripes or streaks.
• Usage Flooring, Tool Handles, Ladder Rungs, Furniture
• Pecan
• 4 x 8 In Plain Sliced Wood on Wood Back Veneer

A popular furniture wood. Is often stained to match American Black Walnut.Veneer Tech