30 Days Lowest Price Guarantee
ViewTV WM-023A Adjustable Outdoor Antenna Mount Pole - Attic Antenna Mount - 1.26" Diameter
DESCRIPTION
Have an outdoor or attic television antenna?
Have a satellite dish you need mounted on your roof?
Look no further than the ViewTV WM-023A Universal TV Antenna Mast with J-Mount Bracket. This is everything that you will need to mount your television antenna / satellite dish to your roof. You can also use this to mount an antenna in your attic without issue.
Specifications:
Made of weather resistant iron
17.5" in length from bottom to top
1.26" Diameter
Installation:
1. Select a desired mounting location.
2. Place the mast through the mounting base of the J-pole.
3. Level up the mounting base and then mark the pilot holes to be drilled with a marking pen.
4. Drill the pilot holes (with a drill bit about half the diameter of the bolt) into the marked areas.
5. Line up the holes of the mounting base of the J-pole with the drilled holes.
6. Drill and then secure the lag bolts into the pilot holes.
7. If necessary, you may adjust the direction of the mast by loosening the two lateral nuts on the mounting base of the J-pole.
***NOTE: This mounting pole WILL NOT work with the ViewTV WA-2608 (150 Mile) Antenna***
Have a satellite dish you need mounted on your roof?
Look no further than the ViewTV WM-023A Universal TV Antenna Mast with J-Mount Bracket. This is everything that you will need to mount your television antenna / satellite dish to your roof. You can also use this to mount an antenna in your attic without issue.
Specifications:
Made of weather resistant iron
17.5" in length from bottom to top
1.26" Diameter
Installation:
1. Select a desired mounting location.
2. Place the mast through the mounting base of the J-pole.
3. Level up the mounting base and then mark the pilot holes to be drilled with a marking pen.
4. Drill the pilot holes (with a drill bit about half the diameter of the bolt) into the marked areas.
5. Line up the holes of the mounting base of the J-pole with the drilled holes.
6. Drill and then secure the lag bolts into the pilot holes.
7. If necessary, you may adjust the direction of the mast by loosening the two lateral nuts on the mounting base of the J-pole.
***NOTE: This mounting pole WILL NOT work with the ViewTV WA-2608 (150 Mile) Antenna***
- Made iron with a weather resistant seal
- 1.26" diameter will fit most TV antennas and satellite dishes
- Pole is 17.5" in length | Screws and nuts are included
- Extra wide base for stability
- ***NOTE: This mounting pole WILL NOT work with the ViewTV WA-2608 (150 Mile) Antenna***