Buy with Confidence:
We are an established seller with great customer service and ratings, 12-month warranty offered from date of purchase, we always stand behind our products!

Specification:
- Item Name: WiFi Repeater
- Dimensions(W X D X H):192*28*8mm
- Input:5V
- Frequency:2.4GHz
- LED: 3(blue/yellow/red)
- Antenna:1*internal
- Standards and Protocols:IEEE 802.11n,IEEE 802.11g,IEEE 802.11b,IEEE 802.11a,IEEE 802.11
- Interface:1*USB port
- Operating Humidlty:10%~90% non-condensing
- Storage Humidlty:5%~90% non-condensing
Indicator light:
- When the indicator light is blue,it means that the current position is moderate and the signal is good.
- When the indicator light is yellow,it means the WIFI+ is too close to the router.
- When the indicator light is red,it indicates that it is too far from the router, the position is not suitable as an extension point.
Easy to set up
without APP,just 3 steps to complete the setup.
1.Connect to wireless,network:wifi+
2.Enter 192.168.19.252 in the browser,then enter the setup interface
3.select the network to be expanded,then enter its password to finish the setup.The expanded network name is xxx_plus
If can't work,please follow below solution to resolve this issue.Thanks.
1.Prepare a slender needles, it is the best if you can find the card thimble of the iPhone
2.To find the RESET hole on the device
3.insert the device into the USB port of PC or power outlet, use the needle to press the reset button through reset hole and hold 5 seconds, then the device will automatically RESET.
please connect the device to try again after you do above action.

• 1, Extend your existing Wi-Fi coverage throughout your home, eliminate Wi-Fi dead zones in hard to reach areas
• 2, Brand-new array antenna,using High gain PCB array antenna,with more reliable performance, improve the performance of 50% compared with the conventional antenna.
• 3, Extends wireless coverage, universal compatibility
• 4, Convenient wall-plug design,USB port for power supply(voltage is 5V)
• 5, The Wi-Fi range extender is located in position of the vertical to the ground with the best wireless coverage effect. you can easily achieve this effect by bending the device to 180°

1, Extend your existing Wi-Fi coverage throughout your home, eliminate Wi-Fi dead zones in hard to reach areasExxact Parts Solutions