Detailed introduction:
7'' LCD Monitor
High-resolution picture
Full color LED backlight display
Low power consumption
The LCD Monitor can replace your original reaview mirror
With 2 video input connects to car DVD, VCR and other video equipment to car backup camera
Parking rearview priority: The monitor will start up automatically, and synchronously display the video from rearview camera when you're backing your car
IR remote control Controlled or by touching the screen buttons

Specification:
Wireless 2.4GHz transmitter/receiver
Work Range: Up to about 8m(Hollowness)
Connects to rear-view camera and front video screen
Fit all RCA composite video connections
Power: DC 12V
Transmitter/Receiver Cable Length:1.4m
Product Weight: 90g

Car Rear View Camera
Sensor: PC1030 1/4 Inch Color CMOS
TV system: NTSC
Effective pixels: 628 X 582 pixels
Scanning System: 2:1 Interlace
Sync System: Internal
Resolution: 420 TV lines
Lens Angle: 2.8mm/120°- 1.8mm/170°
Sensor Area: 5.961mm x 4.276mm
Video Output: 1.0 VP-P,75 OHM
S/N Ratio: More than 48db
Water-proof: IP67-IP68
Minimum 111umination: 0.2Lux/F1.8(0 Lux with LED)
Vurrent Consumpition: No more 300mA
Power supply: DC 12V
Operationg Temperature: -20?-60?(RH95%Max.)
Storage Temperature: -30?-60?(RH95%Max.)
Other Items: Auto matic white balance. Agc and BLC

7'' lcd Monitor
Screen Size: 7 inch
Display Component: Color TFT-LCD
Number of Dots: 480 x 234 Pixels
Video Frequency: PAL/NTSC
Video: Two way video input
Input: DC 12V
Cable Length: 190cm
Color: Black

Package included
1 x Car Rear View Camera
1 x 2.4G Transmitter
1 x 2.4G Receiver
1 x 7" Mirror Monitor
1 x Remote Controller(for the monitor)
1 x Convert Cable
1 x User Manual

• Car Rear View Camera, Small compact size, Low power consumption, Low maintenance, 7 infrared night vision LED, Easy to install and operate, Perfectly solve the issue of bad car rear view effect, Low power consumption
• Wireless Car Rear View Camera receiver and transmitter. Take one minute get your camera become a wireless camera
• Convert any reversing camera with a standard phono/RCA connector into a wireless camera with this universal transmitter and receiver kit
• Eliminates the need to run a cable the length of the vehicle, just connect the transmitter at the camera end and the receiver at the monitor end
• The transmitter also includes a handy pass through for the power so you can connect it inline with your camera. Wireless transmitter with male phono plug and male 3.5mm power plug for supplying power to the camera. Wireless receiver with male phono plug for connection to monitor