How to install
1. Mount the camera on the license plate, and fix it with the existing screws
2. Connect the wireless transmitter with the camera, yellow (RCA video connector) to yellow, red (power connector) to red.
3. Connect the power line on the transmitter to the DC 12V reverse lamp power line, red wire to positive end, black to GND. Fix the transmitter and cables with rubberized fabric.
4. Mount the monitor on the dashboard.
5. Connect the wireless receiver to the monitor, yellow (RCA video connector) to yellow.
6. Connect the power cable that comes with the monitor to the monitor’s red power cord.
7. Connect the power line of the monitor and receiver together to the DC 12V reverse lamp power line, red wire to positive end, black to GND. Fix the receiver and the cables with rubberized fabric.
8. To test the backup system, please switch on the reverse gear. If it doesn’t work, please take a double check of the wire connection.

Monitor:
TFT LCD Monitor Features: 7" LED Backlight Color TFT LCD monitor
Wide screen, high definition, full color
Full function wireless remote, and User friendly controls
Compatible with both PAL and NTSC video system
Easy to install with 2 ways available: standing and mounting
2 RCA Video inputs (V1 for DVD player/V2 for Backup camera) and automatically throw-over
Available for car VCD, DVD, GPS, etc. and especially designed to connect to your car camera
Camera Features: DC 12V Input for 12V Cars
18 IR LEDs up to 10-15 meters(Night Vision Automatic)
IP67/IP68 Water-proof-Rating
120 degree wide angle viewing helps avoid accidents & injuries
Easy to adjust the unit angle and easy to mount

What is included:
1 x 7" TFT LCD Monitor
1 x Holder
1 x Frame
1 x Remote Controller
1 x Universal User Manual
1 x Car Rear View Camera
1 x 2.4G Transmitter
1 x 2.4G Receiver

• 100% brand new,High quality. Easy installation
• Take one minute get your camera become a wireless camera
• Convert any reversing camera with a standard phono/RCA connector into a wireless camera with this universal transmitter and receiver kit
• Eliminates the need to run a cable the length of the vehicle, just connect the transmitter at the camera end and the receiver at the monitor end
• The transmitter also includes a handy pass through for the power so you can connect it inline with your camera. Wireless transmitter with male phono plug and male 3.5mm power plug for supplying power to the camera. Wireless receiver with male phono plug for connection to monitor