Technical Specifications:
CONSTRUCTION: Round 4″ fixtures with integral LEDs. Isolated external driver factory installed inside junction box. One driver for every fixture required.
MOUNTING:
Cut hole in ceiling and snap fixture in opening with attached spring clips. Space in ceiling needed for the driver to fit through the hole - 2″.
Default Driver Input Voltage:
120V AC 60 Hz (Dimmable)
Power factor:
> 0.95 Energy Used: 12W Halogen equivalent: 65W
Beam Angle: 120°
Light output:
Warm White 700 lm, Neutral White 800 lm
CRI:
80
Ambient Operating Temperature:
-40°F (-40°C) to +104°F (+40°C)
Compliance:
cULus Listed, certified to CSA STD. C22.2 No. 250.0
Rated:
Type IC (Direct Contact with Insulation), Energy Star, Air-Tight DIMENSIONS: OD 4 15/16″ (125 mm); ID 3 15/16″ (100 mm); Thickness 1″ (25 mm) Cut out: 4 7/16″ +/- 1/4″ (112 +/- 6 mm) Junction Box Dimensions (with driver inside): 3 5/16″ (85 mm) x 3 5/16″ (85 mm) x 1 1/8″ (32 mm) Suitable for Damp locations. Not suitable for steam showers and saunas.

• Energy used: 12W, 3000K . 740 lm, 65W Halogent Equivalent.
• White
• 105° beam angle, Dimming from 10-100% .
• 70% light output at 50,000 hours.
• Driver included.

Energy used: 12W, 3000K . 740 lm, 65W Halogent Equivalent.Lotus