Technical Specifications:
CONSTRUCTION: Square 6″ fixtures with integral LEDs. Round back side for easy installation. Isolated external driver factory installed inside junction box. One driver for every fixture required.
MOUNTING:
Cut hole in ceiling and snap fixture in opening with attached spring clips. Space in ceiling needed for the driver to fit through the hole - 1 1/2″.
Default Driver Input Voltage:
120V AC 60 Hz (Dimmable)
Power factor:
> 0.98 Energy Used: 12W Halogen equivalent: 75W
Beam Angle: 120°
Light output:
Warm White 900 lm, Neutral White 950 lm
CRI:
82
Ambient Operating Temperature:
-40°F (-40°C) to +104°F (+40°C)
Compliance:
cULus Listed, certified to CSA STD. C22.2 No. 250.0
Rated:
Type IC (Direct Contact with Insulation), Energy Star, Air-Tight DIMENSIONS: 6″ square front plate (171 mm); Thickness 1 1/2″ (38 mm) Cut out: 6 5/16″ +/- 1/8″ (160 +/- 3 mm) Junction Box Dimensions (with driver inside): 3 5/16″ (85 mm) x 3 5/16″ (85 mm) x 1 1/8″ (32 mm) Suitable for damp locations. Not suitable for steam showers, saunas and outdoor locations where directly exposed to rain.

• Energy used: 14W, 4100K . 870 lm, 75W Halogent Equivalent.
• White
• 105° beam angle, Dimming from 10-100% .
• 70% light output at 50,000 hours.
• Driver included.

Energy used: 14W, 4100K . 870 lm, 75W Halogent Equivalent.Lotus