SecuPlus 2Mega Pixels 1080P 4 IN 1 Bullet Security Camera TVI ST-AC4022W 3.6mm Lens
DESCRIPTION
1.Using high-performance image processing chip,with OSD function
2.HD-AHD/CVI/TVI&CVBS HIGH IMAGE,Effective Pixels:1920x1080,IR-CUT,low illumination level
3.25*3pin standard por,low-power and low stream
4.500M losses transmission without delay
5.Support motion detection and privacy zone
6.Use OSD button line control AHD/TVI/CVI/CVBS
Technical Parameters:
Signal System:PAL/NTSC
Resolution:1920x1080P
IR Distance: 20-60m/20-110m
Video Output: HD-TVI(1080P),(AHD/TVI/CVI/CVBS)
Day&Night Switch:Support (ICR)
Frame Rate:25fps(50Hz),30fps(60Hz)
Min Illumination:0.1ux(LED ON) 0.01ux(0-3ux LED)
S/N Ratio:>52dB(AGC off)
Electronic Shutter:Auto 1/50s(1/60s)~1/100,000s
White Blance:Auto
Gain Control:Auto
Working Environmeng:-20℃~-50℃,-10%~90%(humidity)
Power Supply:DC12V(±10%)
IR Voltage:DC2-8V
Operation Mode:
CVBS:Turn UP and hold on 5 seconds
CVI:Turn Down and hold on 5 seconds
AHD:Turn Left and hold on 5 seconds
TVI:Turn Right and hold on 5 seconds
Trouble shooting:
1.Problem:Image normal in the day while vague or being interfered by horizontal stripes at night
Solution:It is the reason that power is not enough or power cable is too long.Change power
supply or shorten power cable.
2.Problem:No iamge
Solution:There are three reasons:if it is Wrong connection to the video cable,you need
reconnect;if power gets problem,you need change power supply;if having not connected to
power supply,you need to plug in.
- Using high-performance image processing chip,with OSD function
- HD-AHD/CVI/TVI&CVBS HIGH IMAGE,Effective Pixels:1920x1080,IR-CUT,low illumination level
- 25*3pin standard por,low-power and low stream
- 500M losses transmission without delay
- Support motion detection and privacy zone;Use OSD button line control AHD/TVI/CVI/CVBS